Explore the circuit
Inspect the component values and connections, then run the ac analysis. Select signals by the component terminals listed in the instruments. After changing a value, run again and compare the new result.
Components in this demo
| Reference | Component | Explicit parameters (SI units) |
|---|---|---|
| V1 | generator | Component default |
| R1 | resistor | resistance: 100 |
| L1 | inductor | inductance: 0.01 |
| C1 | capacitor | capacitance: 0.000001 |
| GND1 | ground | Component default |
Unspecified values come from the component library. Inspect each part in the workbench before using the model in another design.
← All example circuits