Explore the circuit
Inspect the component values and connections, then run the transient analysis. Select signals by the component terminals listed in the instruments. After changing a value, run again and compare the new result.
Components in this demo
| Reference | Component | Explicit parameters (SI units) |
|---|---|---|
| V1 | ac voltage | amplitude: 12 frequency: 50 |
| BR1 | bridge | Component default |
| C1 | electrolytic | capacitance: 0.00047 |
| U1 | regulator pos | Component default |
| C2 | ceramic | capacitance: 1e-7 |
| RL | resistor | Component default |
| GND1 | ground | Component default |
Unspecified values come from the component library. Inspect each part in the workbench before using the model in another design.
← All example circuits