Explore the circuit
Inspect the configured study, variations and acceptance limits in the Verification workspace. Run the study, inspect its report and compare the result after changing a tolerance or device model.
Components in this demo
| Reference | Component | Explicit parameters (SI units) |
|---|---|---|
| V1 | voltage | Component default |
| R1 | resistor | resistance: 1000 |
| D1 | diode | Component default |
| GND1 | ground | Component default |
Unspecified values come from the component library. Inspect each part in the workbench before using the model in another design.
← All example circuits