Explore the circuit
Inspect the component values and connections, then run the logic analysis. Select signals by the component terminals listed in the instruments. After changing a value, run again and compare the new result.
Components in this demo
| Reference | Component | Explicit parameters (SI units) |
|---|---|---|
| CLK1 | clock | frequency: 100 |
| EN1 | logic | state: 1 |
| U1 | counter8 | Component default |
| GND1 | ground | Component default |
Unspecified values come from the component library. Inspect each part in the workbench before using the model in another design.
← All example circuits